This occurs when the MFP does not know the actual paper size loaded in the tray. You can see the light from the lamp by opening the left side cover and observing the upper opening through which the fuser power cables pass. To enter a specific digit, use Up to move the cursor to the left or Down to move the cursor to the right. For supplies information, see on page Remove the screws B securing the two foot brackets.

Uploader: Nashura
Date Added: 22 May 2008
File Size: 12.11 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 29870
Price: Free* [*Free Regsitration Required]

Make Your Selection

Select Print All T30 Logs. Jams and misfeeds troubleshooting Use Up or Down to toggle between Enable and Disable.

Redistributing toner Redistribute the toner if you are dissatisfied with print quality or if the error message on the display is 88 Toner Low.

Repair information XXX Fuser removal 1.


If thin, glossy paper, or carbon forms are used in the ADF, use the high friction pick pad 40X Parts Packet in the parts description column indicates the part is contained in a parts packet.

The scanner registration function is used to set the left margin on the ADF and flatbed. If prompted, press 1 for yes if you have more pages, or 2 for no if you have finished copying lecmark number of lexamrk you want to print in Paper Saver mode.


The scanner CCD returns to the home position. Il personale di assistenza autorizzato deve, quindi, adottare le precauzioni necessarie. Page 87 Problem Solution Wrinkles or creases Make sure paper is loaded correctly.

If toner cartridge is low, try a new toner cartridge. Repair information XXX Removal procedures 1. Remove the right cover. You can see the light from the lamp by opening the left side cover and observing the upper opening through which the fuser power cables pass.

FAX settings menu items should only be adjusted at the discretion of your second level support. Use the Up or Down keys to scroll between A4 and letter. It may also indicate a problem in the transfer roll area. Remove the gear train metal cover.

Lexmark X340 User Manual

Fax Defaults menu Use this Content Choose the quality of the image being sent. Press Press repeatedly until the setting you want is selected. Lift and remove the flatbed cover from the MFP. Front output tray Front output tray The front output tray should be used to output plain paper only.


We recommend disconnecting all external cables from the MFP to prevent damage during service. Remove four screws A in the gear train metal cover. Types of print media. The toner cartridge snaps into lxmark when correctly installed.

Transfer roll Check the springs in the left and right transfer roll bearings. Pressing 1 will display resetting, and then return you to the Network Menu. Table Of Contents Kexmark Chapter 1: MFP produces a black page when copying a document.

Setup steps may vary depending on your country or region. Press to save the margin setting. Also, check the load condition. Lexmark all-in-one printer quick reference guide 3 pages. Always verify the same results from a different print cartridge assembly and developer before proceeding.